Cycloidal pinwheel reducer is usually a up-dated of different type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching device, which are widely used in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical job machinery etc, Sector, cranes and conveyors. various fields.

1. Equipment is made of high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is adopted for all good contact efficiency, gears and with high precision
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service life and high bearing capability;
5. easy to disassemble, check and assemble.

Operation specifications and precautions
1.High modularization design: many equip with various engine or other power insight conveniently.Same machine type may equip with numerous power motor. It is easy to recognize the combination and
junction between every machine type.
2.Transmission ratio: great division, wide scope. The combined equipment type may form very large transmitting ratio, i.e. output suprisingly low rotary speed.
3.Form of assembly: the position to be installed is not limited.
4.High strength, compact: the box body is made of substantial strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing ability of unitvolume is huge.
5.Long life: Beneath the condition of accurate type chosen (including choosing suitable operation parameters)normal operation and maintenance, the life span of main elements of speed reducer (except dressed in parts) should not be less than 20000 hours. The putting on parts include lubricating bearing, oil and oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High velocity ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-down ratio and the efficiency is definitely more than 90%. If employ multi-speed travel the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic transmission principle, the input and outcome shaft are at same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can understand high reduction ratio device.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved concurrently, and there are two gears engaged with 180 degree symmetry. So, the influence of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the position precision and rotation accuracy reach an extremely high level.
4. Less parts, easy installation
The three basic elements achieve a high deceleration ratio, plus they are all on a single axis, so the kit is easy to install and easy to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the pounds is 1/2, but can obtain the same torque potential and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel materials USES specialized steel with high fatigue strength.Different from ordinary transmission device, the amount of teeth meshing makes up about in regard to 30% of the full total amount of teeth. Furthermore, it is in get in touch with with the surface, to ensure that the pressure borne by each gear is reduced and substantial torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss due to friction. Therefore, high lowering ratio can be achieved while maintaining high performance, and miniaturization of driving motor can be realized.
8. Low noise
The apparatus meshing cycle swiftness is low, the transmission movement force balance, which means procedure is quiet, and the vibration is very small.
◆Huge speed ratio and excessive efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will be larger.
◆Because planetary transmission principle is adopted, the source shaft and result shaft are on a single axis line, so that the machine style can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts produces the vibration and voice limited by a minimum.
◆Reliable use and long service life for the reason that main parts are constructed of high carbon chromium steel, large strength is obtained by quenching (HRC58-62), and rolling friction is utilized in a few transmission contacts, therefore the service life is long.
Cycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has various advantages, versatile, and will be both positive and negative operation.

•Big ratio, and large efficiency Smooth operation,

• low noise The make use of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• tiny size Because the application of a planetary transmitting, the source shaft and the productivity shaft on a single axis, making the model to get the smallest possible size.

• Reasonable design, easy maintenance, and breakdown easily install,

• minimal number of parts as well as straightforward lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion carrier, increase the output strength and precision.

(2).Hoop clamp coupling have five connection techniques well suited for different application environments.

(3).Size above PL/PF120(including)precision and high durability integral inner gear casing, processed in a single station,which remove the cumulative error and assembling error of split type.Eliminate casting process;adopt hot of forging process, that may reduce the blank material defects.

(4).The meshing equipment adopt shaving method after carburizing and quenching,which easier to make gear area smooth and high accuracy,decrease the temperature rising caused by gear surface gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its efficiency and mounting dime nsions conform the same types of foreign.
The blend of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, beautiful shape, compact structure and radiate heat efficiently.
Good sealing and adaptability.Its combination with T gear reducer and MB/MBN variator can meet all types of speed requirement.