DK Detachable Teeth Sprockets

Any harm over the teeth surfaces of a sprocket diminishes the existence with the conveyor chain.
With traditional sprockets, significantly worn sprocket teeth had been repaired by teeth padding or the entire sprocket was replaced. In both situation, repair was pricey and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our consumers for that dramatic financial savings in expense and time.
Construction
The teeth is usually replaced by two approaches: personal tooth substitute or sectional teeth substitute.
The bolts and nuts made use of for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated within the suitable.
The over photograph and the prime proper illustration show a sprocket for individual tooth substitute. Because the joint face in between the replaced teeth and the sprocket is formed within a exclusive arc, the bonding accuracy is large along with the sprocket power is enhanced. In addition, because the load acting to the mounting bolts is decreased, there may be much less chance of loosening. This sprocket development is patented.
You can find two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilised for significant sprockets obtaining heavy loads and welded sheet steel hubs for other applications.