High-Quality Right Angle Equipment Drives are created for efficiency, quiet operation, and long service existence. SDP/SI offers a broad selection of Right Angle Gear Drives in a variety of configurations, materials, operating speeds, and multiple ratios. Standard catalog products include precision and industrial quality gear drives provided in both in . and metric sizes. For adjustments or custom designs contact and speak to a SDP/SI applications engineer.
Our providing includes, but isn’t limited to the next:
Miniature sized Right Position Gear Drives, 1 inch square, are perfect for compact designs that want low backlash and insight speeds up to 2000 rpm.
When weight is an issue, get Right Angle Bevel Gear Drives that feature a lightweight housing of PTMT Polyester 30% glass filled, precision surface stainless shafts, sintered bronze bearings and molded nylon gears.
Right Angle Worm Gear Drives accommodate input speeds up to 2000 rpm and so are obtainable in gear ratios: 5:1, 10:1 and 20:1.
Right Angle and Dual Helical Equipment Drives can be found in two models, light-duty, rated speeds up to 600 rpm and heavy duty, rated speeds up to 1725 rpm.
An economy group of Right Angle Bevel Gear Drives is offered in 1:1 and 2:1 ratios and rated speeds up to 500 rpm.
E Series Right Angle
The Ever-Power E Series is a high efficiency, right angle gear reducer made for increased torque density, reduced inventory and right angle worm gearbox improved efficiency. By utilizing modified helical-bevel technology, the Electronic Series has the capacity to operate at 90% efficiency and can provide up to 60% higher torque when compared to a typical worm equipment reducer. Through various components and modular elements, the Electronic Series recreates the vital dimensions of a typical worm gearbox and provides the chance to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with ratings to 27 HP.
Available in single, double & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been at the forefront of developing equipment technology to fill certain requirements of our OEM clients. Our close partnerships with this installed customer base provided much insight into their evolving need for more high-precision right-position gearing options. To be able to fill that require, Ever-Power expanded upon our correct angle item offering to include a number of high-precision worm gearboxes, known as our EP Series.
These servo grade speed reducers are perfect for the most difficult of movement control applications. Each series incorporates a globoidal worm equipment mesh design in order to achieve the torque handling capability and the highest levels of precision our SHIMPO customers have come to anticipate from us. The input style of our EP right-angle gearbox applies the same idea of motor modularity that’s common across our High Precision product family, meaning our clients and distribution partners get the same degree of flexibility, product variety, and overall availability that is unparalleled within our industry.
Advantages of the EP Series system design;
Quiet operation, compared to other competitive worm gearing
Compact, with exact reduction ratios
High torsional rigidity and torque carrying capacity
A reduced backlash feature, unique among right-angle gearheads
Industry standard hollow bore result with other shafted options
Extremely lightweight, optimized construction
Free of maintenance, lubrication for lifetime
These right-angle servo grade gearboxes are ideal for applications within custom assembly and test systems, packaging equipment, metal cutting and steel forming machinery, general purpose automotive, among many others. If the application requires the compact footprint of a right-angle worm equipment without sacrificing on the performance, contact Ever-Power about the EP Series today.
Standard Right Angle Gearbox Features
All ratios equipped with right-hand worm gears
Load capacity unaffected by direction and rotation
Selection of mounting Options
Upon Request:
Left-Hand Gears
STAINLESS Input/Output Shafts
Solid or Hollow Output Shaft
Decide on a Gearbox or Speed Reducer
Worm Gear Rate Reducers
sw-1-parent.jpg
SW-1
SWB-5 & SW-5
Right Angle Miter Equipment Drives
miter-gear-parent.jpg
Miter Gear Drives
Mini Right Position Helical Gear Drives
miniature-right-angle-parent.jpg
RA-200
RA-300
Custom Speed Reducers
custom-speed-reducer-parent.jpg
Custom Speed Reducers
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high insight speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales personnel for help determining which gearbox alternative is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and allow for a corner change with optional dual output. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting options providing flexibility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest operation of our rate reducers. These gearboxes are made to manage varying loads with small backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we have a solution to suit your needs. Our 52 frame size is also available with plastic-type material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations supply the highest efficiency and best output torque of most our swiftness reducers. These gearboxes are made to handle varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the best choice for continuous duty applications. Their gear cluster design provides an effective method for dissipating heat. Parallel shaft gearboxes have the shortest length of our inline gear reducer options so they work very well in conditions with limited space. Our parallel shaft gear reducers provide an affordable drop-in alternative solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, acceleration reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a gear in the type of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A primary benefit of worm gear reducers is usually that they generate an output that is 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox has right hand threads; to change the path of the result, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio
Cast Iron Worm Equipment Reducers can be found in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The devices possess a one piece #Fc20 all cast iron housing, NEMA electric motor quill style input flanges or shaft inputs, come pre-loaded with synthetic oil and also have a 1 year warranty.
Features:
Tapered roller bearings on the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied inside and outside of the gearbox
Air dry special dark paint
Product Specifications
OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART NUMBER HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Right Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR MINUTES) 27
Result SHAFT THRUST LOAD (LBS.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1
Ever-Power EP series triple-reduction worm gear speed reducers are available in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in pounds. for the 7” CD EP-70 to 582,900 in lbs for the EP-200. Mechanical 
HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are perfect for water/waste-water devices drive applications such as for example thickeners and clarifiers, which require a vertical straight down shaft. Other offered configurations also make Ever-Power triple decrease reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or components handling systems where huge torques/slow speeds are needed.
These reducers are also obtainable with a helical primary reduction stage and are termed the HDVM series
Enclosed Gears / Gearboxes
Enclosed gears, also known as gearboxes or velocity reducers, are open gears within a housing. The casing supports bearings and shafts, keeps in lubricants, and protects the elements from surrounding circumstances. Gearboxes are available in a wide variety of load capacities and quickness ratios.
The purpose of a gearbox is to increase or reduce speed. As a result, torque output will be the inverse of the function. If the enclosed drive is definitely a speed reducer, the torque output will increase; if the drive raises speed, the torque output will reduce. Gear drive selection factors include: shaft orientation, acceleration ratio, design type, character of load, gear rating, environment, mounting position, operating temperature range, and lubrication.
Basic Types of Gearboxes
Worm Gear Speed Reducers
A single reduction quickness reducer can achieve up to 100:1 decrease ratio in a little package. Referred to as right position drives, these contain a cylindrical worm with screw threads and a worm. With a single begin worm, the worm gear advances only one tooth for every 360-degree switch of the worm. So, whatever the worm’s size, the apparatus ratio may be the ‘size of the worm gear to 1′. Higher reduction ratios can be created through the use of double and triple decrease ratios.
Helical Gear Speed Reducers
Provide high-efficiency speed decrease through 1, 2, 3, or 4 sets of gears. Power can be transmitted from a high-swiftness pinion to a slower-speed equipment. Helical gears usually operate with their shafts parallel to one another. Both most common types will be the concentric (input and result shafts are in collection) and parallel shaft (input and result shafts are offset). Single-stage helical gear reducers are usually used for gear ratios up to about 8:1. Where reduced speeds and higher ratios are required, dual, triple, and quadruple equipment reduction stages may be used.